VI solar Depot products:

For Mobile Applications

The MM Series Inverter/Charger from Magnum Energy – a new modified sine wave inverter providing a cost effective solution for those with
smaller power needs in mobile applications. Versatile, easy-to-use, and lightweight, the MM Series provides a reliable base for your energy system.

Features

·    Choices: Not only does the MM Series come in two power models, but the series offers choices for AC input and output as well. The MM Series offers the choice of an AC pigtail to plug into a dedicated outlet, or you can hardwire the unit directly from the AC breaker panel. And choose from a built in 15 amp GFCI outlet or hardwire the AC output directly to a branch AC circuit.

·    Standard transfer relay:The standard 7 or 16 amp, depending on model, transfer relay will pass AC power through the inverter when using shore or generator power.

·    Versatile mounting: Mount the MM-AE Series on a shelf, bulkhead, or even upside down.

·    Fan cooled:The MM Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.

·    Low/high battery protection: If your battery voltage reaches below 10 VDC or above 15.5 VDC, the MM Series will automatically shut down.

·    Current overload protection: The MM Series will automatically shut down if its output wattage is exceeded or it detects a short in
the wiring, saving the unit from costly damage.

·    Convenient switches: The MM Series comes with an on/off frontmounted switch with an easy-to read LED indicator.

·    Circuit breaker protection: Every model comes with built in input and output circuit breakers for ease of installation.

·    Battery temp sensor: The standard battery temp sensor monitors temperatures from 0 - 50° C on all inverter models with a charger.

·    Buy with ease: The MM Series is backed by a two-year (24-month) parts and labor warranty.

Accessories and Options
Remote control: Optional remotes are available for the MM Series, including the MM-R, MM-RC, and the ME-RC. A four wire phone jack comes standard with the unit to connect the remote

MM_series_mobile_data_sheet.pdf
MAGNUM MM1212 Mobile Inverter   12V   1200W          $695.00

Reliable Off-Grid and Backup Power from Magnum Energy

The RD Series Inverter/Charger from Magnum Energy is a new generation inverter designed specifically for renewable energy use. The RD Series is powerful, easy-to-use, and best of all, cost effective. Features include an easy access wiring compartment, four stage temperature compensated battery charger, dual input 50 amp transfer, die cast aluminum base with an aluminum cover for optimum high temperature performance.

Power Factor Corrected (PFC) Charger: The RD series of inverter/chargers use less energy from a generator than standard chargers – using 25-30% less AC current than standard chargers.

Safe and reliable: The RD Series is ETL Listed to the stringent requirements of UL 1741, ensuring that the inverter is safe and reliable.

Easy-to-install: Install the RD Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your power cable (AC) to the inverter’s easy-to reach terminal block, connect the batteries, and switch on the power.

The RD Series Inverter / Charger

You asked and Magnum listened. The RD Series Inverter/Charger is loaded with features:

·    Choices: The RD Series comes in four power models and 12 and 24 volt models, allowing you to choose the model that is right for you.

·    Versatile mounting: Mount the RD Series on a shelf or wall.

·    Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

Accessories and Options
Remote control: Optional remotes are available for the RD Series. A four wire phone jack comes standard with the unit to connect the remote.

RDSeriesDataSheet(64-0300RevB).pdf
MAGNUM RD2824 Inverter/Charger   24V   2800W       $1300.00
 

Inverter Accessories
 

Xantrex XW Accessories

XW System Control Panel
The XW SCP is a Xanbus™-enabled device featuring a graphical, backlit LCD screen that displays system configuration and diagnostic information for all devices connected to the network. When installed as an XW System accessory, the XW System Control Panel eliminates the need for separate control panels for each device and gives a single point of control to set up and monitor an entire XW Power System.

Interfaces with:
XW4024, XW4548, XW6048 Inverter/Charger(s), XW Solar Charge Controller, XW Auto Generator Start

Features:

• Graphical 128 x 64 pixel, backlit LCD screen
• Large, tactile keypad buttons
• Intuitive onscreen menu system (basic and advanced)
• Xanbus™-enabled

XW-SCP.pdf
XW System Control Panel           $325.00

Xantrex XW Power Distribution Panel
For Xantrex XW Inverters

The XW Power Distribution Panel with conduit box is factory-wired and labeled to support a code-compliant single-inverter installation. The XW PDP can be configured to mount on either side of the inverter/charger. Internal wiring and breakers can be added to expand the XW System with up to three inverters, four charge controllers, or other equipment to support larger systems, including three-phase.

Designed with consultation and input from industry experts, dealers, and installers, the XW sets a new standard for battery-based inverter/chargers. Integrating the best features available in the market, innovative new features by Xantrex and balance-of-systems components, the XW Hybrid Inverter/Charger’s design makes installation quicker and easier. The XW offers high efficiency and unprecedented surge capacity to maximize the owner’s return on investment. No other inverter/charger looks or performs like the XW.

Features

• Accommodates both AC and DC breakers and wiring for three XW Hybrid Inverter/Chargers and four XW Solar Charge Controllers
• Includes breakers and wiring to connect to XW Hybrid Inverter/Charger
• Wiring is labeled and cut-to-length, ready to connect to inverter
• Uses flexible Arctic Ultraflex Blue™ wires
• Multiple knockouts on sides, top, bottom and back of unit
• Includes mounting back plate and and XW Conduit Box

Product Compatibility
The distribution panel and conduit box interface with the following products:

• XW Connection Kit (for second XW Hybrid Inverter/Charger) and XW Conduit Box
• XW4024, XW4548, and XW6048 Inverter/Chargers
• XW Solar Charge Controllers (requires customer-supplied breakers and wiring)
• C-Series Charge Controllers (requires customer-supplied breakers and wiring)

Dimensions

• XW PDP dimensions (H x W x D): 30 x 16 x 8.25” (761 x 406 x 210 mm)
• Shipping dimensions (H x W x D): 48 x 21 x 13.5” (1220 x 533 x 343 mm)
• Shipping weight: 67.2 lb (30.5 kg)

Morningstar Corporation
Prostar
PWM Charge Controller

The new ProStar is available in 15 or 30 amps, 12/24 or 48 volt, and negative or positive ground. The controller may be paralleled for a solar input rating of up to 300 amps. An optional meter provides an extensive display of self-testing and system status.

Reliability
Expected failure rate will be less than 1 per 1,000 units over 5 years.

* Improved protections and added many new protections (see list below)
* Power MOSFET voltage rating increased 25%
* Eliminated all trim-pots and other troublesome parts
* Reduced the digital meter components from 75 to 16
* Increased the current-carrying copper traces by 75%
* Increased temperature rating of many parts
* Made conformal coating protection standard

Battery Charging
Expanded the battery charging options and capabilities.

* Added a third battery type selection (gel, sealed, flooded)
* Added a "float" stage to the battery charging algorithm
* Expanded the to account for depth of discharge history
* Added a remote temperature probe option
* Improved the accuracy of all charging parameters
* Moved the built-in temperature sensor to read ambient conditions more accurately

Installation & Operation
The new ProStar is easier and safer to install and use, with more operating information provided to the user.

* Self-diagnostic test provides assurance the controller is working correctly, or indicates a fault that is present
* Rotary switch provides simple and positive selection of battery type (and LED's confirm the selection)
* Terminals are longer with more screw threads, screwdriver holes in the case are larger, and plastic tabs isolate the terminals
* The pushbutton disconnects the load first (for weekend cabins, boats, etc.), then disconnects the solar if held down for 2 seconds (indicated in the meter)
* Five protection functions are displayed in the digital meter
* Meter indicates "OFF" if solar or load is disconnected
* PWM is indicated in the green battery status LED (blinking)
* A telecom jumper eliminates PWM noise if present
* Mounting standoffs prevent stress cracks in the case

Protections
Protection against abuse and faults is now comprehensive.

* Added solar short circuit and overload protection / auto recovery
* Added load overload protection / auto recovery
* Improved load short circuit protection / auto recovery
* Improved protection of the load from voltage spikes
* Improved low battery voltage and brownout protection / auto recovery
* Other existing protections have been improved

Accuracy
Precision design for improved performance and accurate meter display.

* Added 0.1% resistors and other precision components
* Upgraded to a more powerful, faster microcontroller with better resolution
* Extensive digital filtering for improved accuracy
* Added 2 precision shunts for very accurate current measurement
* Calibration of the microcontroller during final QA testing in production

Digital Meter Display
Completely redesigned, improved and expanded the digital meter.

* Meter reads values directly from the microcontroller
* Very accurate voltage and current values measured and displayed
* Added self-test with specific faults and conditions displayed
* More status and protection conditions are displayed
* Reduced self-consumption to 1 mA
* Current is now measured in the ungrounded leg only
* Meter connector is more robust and easier to attach
* Any meter can now be mounted to any ProStar with no calibration required

Standard Controller Features:

Prostar PWM Charge Controller   30 Amp    12/24V           $250.00

Combiner Boxes

Midnite Solar
MNPV Combiner Boxes
MNPV3

ETL listed for the US and Canada up to 3 1/2 pitch

The MNPV3 features:

·    Din rail to accommodate up to three 150 VDC breakers

·    6 position PV negative bus bar

·    6 position ground bus bar

·    60 Amp Plus bus bar

·    Gray aluminum rainproof enclosure

Dimensions: 11"H x 5 "W x 4 "D

Click here for MNPV3 Manuel and Specs
Midnite Solar Combiner Box 3    w/o Breakers          $97.00

SMA SunnyBoy Combiner Boxes

SBCB 6 Combiner box   $340.00

·          600VDC Max

          90 Amps Max output current (72A continuous)

·          3R Enclosure

·          6 positive, 6 negative PV inputs

·          10-6 AWG input wire size

·          6-300MCM output wire size

·          1-20 Amp circuits. Midget input fuse

Dimensions: 10”H x 8”W x 6”D

Shipping weight: 12 lbs

SBCB 12 Combiner box   $505.00

·          600VDC Max

·          3R Enclosure

·          12 PV inputs

·          10-6 AWG input wire size

·          6-300MCM output wire size

·          1-20 Amp circuits

·          Midget input fuse

Dimensions: 16”H x 16”W x 6”D

Shipping weight: 30 lbs

Xantrex DC250 Amp Disconnect

Xantrex makes DC input safety a simple matter with our complete line of DC disconnects and breakers. The high amperage DC breaker is housed within a powder coated enclosure with conduit knockouts for SW and DR series inverter connection. Our DC disconnects are simple to install and meet all electrical code requirements for appropriate circuit protection.

DC disconnects are expandable, allowing an additional 175 or 250 amp inverter breaker to be installed for dual inverter installations. DC input/output breakers for PV, charge controllers, or DC loads can also be filed installed in a DC175 or DC250.

 Click here for specifications on DC Disconnect 250A
Xantrex DC250A Disconnect             $380.00

Other Solar Products

Solar Laptop Charge

1. Product description:
(1) Using the high-efficiency solar panel, It can be applied to outdoor work, journey, exploration
and areas that lack of electricity resources. It’s a green, convenience mobile electrical resource.
(2) It has a Li-ion battery of 11000mAh3.7V as its electrical source that makes its discharge time
longer. The battery has no memory effect, so it can be used longer.
(3) The solar panel is designed as folding style and can be separated from the adaptor, more convenience
and easier carried.
(4) Has multi-group electrical output source and is prepared with many kinds of connections; it is suitable for charging staple communication equipments, digital equipments and laptops.
2. Function Introduction:
Instruction of Indicator lights and ports
Power button: It has two functions, power on/off and choose output voltage. Pressing the button for 2
seconds to power on or off. When this equipment is on, press the button double times in a second to
change the output voltage. This function can succeed in changing the three kinds of voltage circularly.
CHG-IN socket: This port is the equipment’s charging input port. The inner Li-ion batteries can be
charged by AC charger or external solar battery panel through this port. The inside one is positive pole
and the outside cathode.
DC output socket: Using the Power button, you can choose three kinds of output voltage. And then choose
the right voltage for mobile phones, digital cameras or laptop. Make sure the voltage you want choose one,
then Insert the connection. The voltage of this socket could not be changed. This function prevents the
equipment being damaged from the changing voltage.
USB 5VDC Output: The Maximum output electrical current of this port is 500mA.It can supply for equipments
that using USB as their connections. Or charging MP3.
Function indicator LED lights: This equipment has five LED lights as its function indicators. Three for output
voltage indicators; CHG the charging indicator light will on, when external electrical source is charging this
equipment ; BAT the battery capacity Indicator light will be green when the battery’s current is more than 70%.        And when it is orange, it means the capacity is between 20%-70%, red indicate less than 20%
 3. Using methods
(1) Charge the adaptor: Unfold the solar panel bag then face the sunlight directly, then insert the down-lead plug
into the adaptor socket “CHG. IN”. The yellow light will be on if the adaptor is working normally, showing
that it is charging now. It can charge the built-in battery automatically. Please adjust the solar panel to
face the strongest angle of sunlight to gain the best charging currents. In the standard sunlight, it can be
fully charged within 7 hours.
(2) Charge for mobile phone: When power on, choose the 5.6V voltage. Using the right connections to charge different mobile phones. The maximum current is 500mA. This 5.6V range compatible with many kinds of digital products whose input range is around 4.5V-6.5V.
(3) Charge for digital camera: When power on, choose 8.4V voltage. Using the right connections to charge different
digital cameras. The maximum current is 500mA. It also compatible with many kinds of digital products whose input range is around 6.5V-8.4V.
(4) Charge for laptop: When power on, choose the 18V voltage. Using the right connections to charge different laptops. The maximum current is 3AThis voltage compatible with laptops whose output is around 16V-19V.If you want to use  the laptop that is working, please take off the laptop battery to earn longer working time
The using methods above are suitable to the common model of mobile phone, camera and laptop. Please make sure the voltage range of the equipment you want to charge.
 4. Note
(1) Make sure to use this equipment as the user manuals say. Or you may damage the equipment you want to charge, for the input voltage ranges are so wide.
(2) Don’t use any aculeate metal to touch or scrape the input and output sockets.
(3) This product is not water-repellent. If it falls into water carelessly, please turn to professional technician for help.
(4) When the red light is on during charging equipment, it means that the built-in battery of this adaptor is running out. Cut off  the connection at once. And recharge the batteries as soon as possible.
(5) When charged over, please cut off the electricity at once. And pull out the connection.
 5. Dimension
(1) Size of adaptormm:170L×75W×30H
(2) Size of folding solar panel bagmm:310L×130W×40H
(3) Size of unfolding solar panel bagmm1000L×310W×3H
(4) Weight of adaptor/solar panel bagkg0.35/1
(5) G.W.kg1.8
 

This product is a multi-functional solar emergency charger.Built-in 1350mAh high capacity rechargeable polymer lithium battery, it can charge your mobile phone,digital camera,PDA,Mp3,Mp4,etc. whenever and wherever.Style design is convenient for you to carry.

Technical Specifications:

Product Performance:
1. Meet emergent use
When you go outside and phone power is cut off, you can use your mobile phone by solar energy.
2. Convenience Whenever and wherever you are, you can charge your mobile phone in time, and you could talk with others when charging.
3. High efficiency. Charging 60 minutes, the charger could transfer the energy from the build-in battery to your mobile phone battery, and the energy can be used for talking for 100-150 minutes.
4. Environment protect, Save resource. You can use solar energy to charge your mobile phone without any pollution by utilizing unlimited solar resource.
5. Modern and portable. Modern design, stainless steel case, small size, convenient to take with you.
6. Safe use. Over voltage protection for the circuit and your mobile phone. Smart charge, safe use. Fits For: Mobile phone (standard accessory are four kinds of phone connector adaptor: NOKIA, SAMSUNG, MOTOROLA, SONY-ERICSON, Mini USB) Digital camera,PDA,Mp3,Mp4(The battery capacity under 1200mAH)

This product series are of top quality with novel design, compact dimension, waterproof, durable and environmentally friendly and convenient to use, easy assembly and dismantle, can be placed on table, on wall or carried by hand. Safe reliable and long lasting: it is an unique circuit including an over-charge protection device. High quality rechargeable battery and energy-saving lamp are used. They are suitable for isolated homes, shops, restaurants, hospitals and schools. They are especially suitable for remote mountain regions, fishing boats, tourist sites, outdoors fields and other places where electricity is short in supply.

This product is one of new style lighting which can save energy and green environment ,it has long-life usage ,high brightness, save electric energy and so on .it does not need that city offer power ,only need to put the goods in the sun in daytime about 4.5 hours, and can continue using above 8 hours in the night. It is a necessary product for family or factory, encampment, field and some less power area.

The product uses maintenance-free features storage battery as nickel cadmium or ni-mh ,so it becomes small volume ,light weight and long-lift usage. when battery end discharge ,please turn down in time and wait charging next day. The light has fully electrical ,it can use above 5 days based on bighting 3 hours everyday .the light does not have solar switch ,so it can use as solar garden lightings .

Note Item:
The nickel cadmium has remembering effect ,so must be discharge above one time in one mouth ,in order to clear up remembering effect.

Intelligent Solar Charge Controller

Solar Charge Controllers apply to all types of photoelectric panels and various types of batteries,
MCU (MicroProcessing Controller) has PMW (Pulse Modulation Widefrequency) 0~100% variable
duty cycle process. Depending on the types and actual charging situation of the battery, CNCD
controller series can provide the fast and best charging voltage and electricity from the PV panel.
CNCD are equipped with advanced manmachine interactive function, so the user can adjust the
charging voltage.CNCD Solar Charge Controller is applicable to solar photovoltaic systems coordinating the operation of solar panels, batteries and loads. With additional protection functions, it makes the whole system operating efficiently and safely.

Function:
1. Overloading protection
2. Short circuit protection
3. Conversed discharge protection
4. Reversed polarity connection protection
5. Thunder protection
6. Low voltage protection
7. Overcharge protection
8. Batteries stop and charge voltage HVD sets up
9. Charge and low voltage LCD sets up
10. Display the capability of the battery SOC
11. Loads and comeback setups
12. Intellectualized temperature compensation
13. Store, calculate and display the charged AH on the LCD screen
14. Store, calculate and display the discharged A on the LCD screen
15. CPU control and LCD-display

Specification: